Miha's utilities forum >> Mihov Mail Sender
 
Miha's utilities by Mihov.com d.o.o.

Next thread   Back to list

  hi    hits: 1163
Posted by    
Reply      Monitor
please i just downloaded the php mail sender, and is showing connect failed. please i will like to know is there is any solution to this  
 
 

  Back to list

  Re: hi    hits: 625
Posted by    
Reply      Monitor
There are several reasons why this happens. Usually it has to do with the wrong settings for the mail server. You can read more about setting the program correctly in the help file in documentation.
Look at the troubleshooting section:
http://www.mailsender.info/help.php#trouble

Very valuable information is also available here at the program forum -you should definitely look at it.

I hope you will set up the program so you will be able to use it correctly. First I suggest checking the SMTP server settings and your user name - if you don't have this information your ISP should provide it.

I hope you succeed.

Have fun,

Miha.



charlesx5 wrote:
> please i just downloaded the php mail sender, and is showing connect failed. please i will like to know is there is any solution to this
 
 
 

Next thread   Back to list

  conection failed    hits: 1973
Posted by    
Reply      Monitor
some times it sends 100 messages, some time 10, some time 67, etc. After, it stops and it gives me the message: conection failed. It is impossible in the same day to restart the sending. How can I solve the problem ?  
 
 

  Back to list

  Re: conection failed    hits: 861
Posted by    
Reply      Monitor
Hmm... Have you notices that it stops with certain type of address, for example all on the same domain? Sometimes when you send a message to the person that is in the same domain as you and the server doesn't know this address, it refuses to receive the mail. The program then wrongly understands this as a permanent error and stops sending the mails.
If this happens, just restart the program and try again, there is no need to wait for the next day.

I hope you will find out something about the domain names.

Have fun,

Miha.
 
 
 

Next thread   Back to list

  Sending Picture in email body    hits: 1934
Posted by    
Reply      Monitor
Is there a way to send a picture (jpg image) within a body of the mail. Not as an attachment file.

If picture sent as attachment, most of email clients don't show the picture, but only link to a attachment .

Thank you

Br,
David
 
 
 

  Back to list

  Re: Sending Picture in email body    hits: 957
Posted by    
Reply      Monitor
Hi,

yes, there is a way, but it's rather complicated and I think it's not worth trying. But if you have the appropriate tools, then it might not be so hard...
Instead of text message send HTML message. You have to 'design' the message in some HTML-editor and then paste it into Mail Sender.
Now, there's the tricky part... How to add the image. Some editors allow to save the whole site (or page with images) as one file, that is that they include the image in the HTML (and they transform it to base64, of course). In this case you might just send the HTML mail and the image will get shown.
I haven't tried that myself, so if you do and if it works, please post your findings here :)

Good luck,

Miha.
 
 
 

Next thread   Back to list

  Help in Connection    hits: 1488
Posted by    
Reply      Monitor
Hi,
I'd tried sending a mail but got a respone of not entering my e-mail settings corectly. I believe it could be from my SMTP settings but I'd like u to clearify me more as to examples of SMTP servers I could use.

Right now, I'm using a GSM (DiGi) Edge Active for my inteernet conection. I'd really appreciate if u could be of help 'cos I've got lots of work to do with ur fantastic software.

Thank u very much.
 
 
 

  Back to list

  Re: Help in Connection    hits: 800
Posted by    
Reply      Monitor
Hi!

I'm sure it's something with the settings or with the SMTP server - note that only servers with no user authentication are currently supported.

You can try to use some of the free mail services that offer free SMTP servers with no authentication. I have Googled around and it is hard to find one because that would allow sending spam. Usually the user has to register for their service (here is a list of such services: http://www.freemailguide.com/free_pop3_email.html), but more common is that the ISP provides SMTP server (here is a list of providers and their servers: http://www.e-eeasy.com/SMTPServerList.aspx). Do you have this option? Note that the server has to be unsecure and work with no password for the program to work (just the user name).

I think you should have no problems using your ISP's SMTP server. I think asking your local ISP for their SMTP is the best solution available.

Using GSM connection (or any other!) should and will not make a difference - as long as the SMTP is available and accessible.

Best regards,

Miha Psenica.
 
 
 

Next thread   Back to list

  PLS PASTE FREEOUTGOING MAIL SERVER AND    hits: 1617
Posted by    
Reply      Monitor
HEY MAN PLS PROVIDE US FREE OUTGOIGN MAIL SEVER AND USERNAME PLS... I DIDNT BUY THE SOFTWARE AND BE AT SUCH LOSS  
 
 

Next thread   Back to list

  PLEASE WHAT IS GOING ON.    hits: 1885
Posted by    
Reply      Monitor
I HAVE PAID FOR UR SERVICES AND I CANT SEND MAIL IS SAYING CONNECTION FAILED
PLZ WHAT DO I DO.I WANT TO ENJOY MY MONEY PLZ.
 
 
 

  Back to list

  Re: PLEASE WHAT IS GOING ON.    hits: 1007
Posted by    
Reply      Monitor
I have sent you an answer over e-mail.

Miha.
 
 
 

Next thread   Back to list

  PLEASE WHAT IS GOING ON.    hits: 1521
Posted by    
Reply      Monitor
I HAVE PAID FOR UR SERVICES AND I CANT SEND MAIL IS SAYING CONNECTION FAILED
PLZ WHAT DO I DO.I WANT TO ENJOY MY MONEY PLZ.
 
 
 

Next thread   Back to list

  List of (free) SMTP servers that can be used with Mihov Mail Sender    hits: 4751
Posted by    
Reply      Monitor
Hi all!

This time I have a question for you. I am trying to put together a list of (free) SMTP servers or e-mail providers that work with Mihov Mail Sender without problems. This will be a valuable information for all new users.

Please write your e-mail provider as a reply to this post. If possible, give some extra information or a review.

Thank you!

Miha.
 
 
 

  Back to list

  Re: List of (free) SMTP servers that can be used with Mihov Mail Sender    hits: 1801
Posted by    
Reply      Monitor
iburst.co.za is my isp and would luv to get mihov to work with it.

thanks
thabo
Miha Psenica wrote:
> Hi all!
>
> This time I have a question for you. I am trying to put together a list of (free) SMTP servers or e-mail providers that work with Mihov Mail Sender without problems. This will be a valuable information for all new users.
>
> Please write your e-mail provider as a reply to this post. If possible, give some extra information or a review.
>
> <b>Thank you!</b>
>
> Miha.
 
 
 

Next thread   Back to list

  command line    hits: 1896
Posted by    
Reply      Monitor
Can I use Mail Sender through command line?
Which arguments are available?
 
 
 

  Back to list

  Re: command line    hits: 1161
Posted by    
Reply      Monitor
Hi!

At the time (version 0.8) there is no command line parameters available, sorry.

Miha.
 
 
 

Next thread   Back to list

  Free SMPT servers for mail sender    hits: 2993
Posted by    
Reply      Monitor
Can anyone tell me a free webmail provider that works with mail sender. Thank you.  
 
 

Next thread   Back to list

  Mihov Mail Sender - version 0.8 released    hits: 1606
Posted by    
Reply      Monitor
Hi everyone!

After a long time I am happy to tell you that I have released a new version of Mihov Mail Sender! The new version supports even more mail servers and has better user functions. Rich messages can now be previewed. The program comes with the help file included and the support here on the forum is well as well (I think?). What else is new:

  • option to preview HTML messages in browser
    (File -> Preview HTML messsage)
  • help file added
  • user can select mail server port
  • choice for text or HTML messages remembered for the next run
  • easier to delete addresses from the address bar
  • right-click menu on address list box: delete all addresses
  • uninstall deletes log file as well
  • basic input checks added to the properties window
  • properties window controls are now aligned
  • web site descriptions are translated into several languages at http://www.mihov.com/sw/
  • mailing list with updates created at http://groups.google.com/group/mihov/

Mihov Mail Sender is 'Free to Try' without any limitations in functionality.
You can download the full version from the web page at http://www.mailsender.info/download.php - you can register the program directly on a SWREG secure server here: https://www.swreg.org/soft_shop/2981/shopscr15.shtml

Note: the registration keycode from previous versions is of course valid with the new version as well!

Have fun,

Miha.
 
 
 

Next thread   Back to list

  I need an email bulk sender and would know how to setup email bulk sender..    hits: 2398
Posted by    
Reply      Monitor
I need an email bulk sender and would to know how to setup email bulk sender..Pls help me out  
 
 

  Back to list

  Re: I need an email bulk sender and would know how to setup email bulk sender..    hits: 1358
Posted by    
Reply      Monitor
If you need it for spam, you are NOT in a right place.

If you need it for your newsletter or other MORAL activity, then Mihov Mail Sender is great for you! Just download it, install it and give it a try!

http://www.mailsender.info/

Miha.
 
 
 

Next thread   Back to list

  using mail-sender with DSL    hits: 2421
Posted by    
Reply      Monitor
Hi!
I have just installed the programme and get a 'can' t connect' message . I sthere a problem in using the product with DSL? I'd be grateful for any help.
Regards
 
 
 

  Back to list

  Re: using mail-sender with DSL    hits: 1378
Posted by    
Reply      Monitor
Hi!

There is no limitation on what kind of connection you use for connecting to the internet. You can use modem (dial-up), cable, any DSL, wireless, GSM/GPRS/UMTS,... It is not important.
Important are the settings you have. First make sure internet is available, them check your mail (SMTP) settings. I suggest you try another mail provider if one doesn't work.

Good luck!

Miha.
 
 
 

Next thread   Back to list

  Ascii value of <ALT> + <<ENTER>    hits: 5450
Posted by    
Reply      Monitor
How can I get the ascii value of <ALT> + <ENTER>. I need it basically to trap the new line sequence in micorsoft excel  
 
 

  Back to list

  Re: Ascii value of <ALT> + <<ENTER>    hits: 3277
Posted by    
Reply      Monitor
Well, that would be two keys. You can't do that with Mihov ASCII Master. I suggest you try searcing windows documentation or some forums.

Miha.
 
 
 

Next thread   Back to list

  10 recepients maximum?    hits: 3400
Posted by    
Reply      Monitor
I can only send to 10 people at a time, I have 250 people on my list. What is wrong. I have cable modem. Thanks  
 
 

  Back to list

  Re: 10 recepients maximum?    hits: 2066
Posted by    
Reply      Monitor
There is no maximum number of recipients!

Try to find out what is wrong with the tenth address. Search for empty lines, spaces, invalid addresses,...
If you don't find any typos just try to delete the tenth address and the program will continue normally...

Another possibillity is that the server refuses to send the message to that user, but the program should continue normally in that case.

Another option is that your server has some sort of virus or spam protection and it only lets 10 messages to be sent; then it returns an error. Ask your service provider about that!

Hope this helps!

Miha.
 
 
 


  Re: 10 recepients maximum?    hits: 1766
Posted by    
Reply      Monitor
I use a comcast account. I can send as many emails as I want normally, even with cc and bcc too.

BUT with this program (that I just paid to register) I can only sent to 10 recipients at a time as well.. VERY FRUSTRATING!

Clark
 
 
 


  Re: 10 recepients maximum?    hits: 1731
Posted by    
Reply      Monitor
Hi!

Let me emphasize again, that there is no limit in number of recipients. The list can be as long as the user wants.

If the error occurs when messages are sent, it would really help me if you can write what error message is being displayed.

Another option is that your service providem (e-mail provider) is having some anti-spam filter. If it senses that you might be sending spam, it blocks your messages. I would advice you asking the provider this question.

There is a difference between ordinary sending of mail and sending via Mihov Mail Sender. If you sen the same message to many people via Outlook, the message is sent only once - that is why all the people can see other recipients as well. Mihov Mail Sender actually sends one e-mail to each person, and that is why your service provider may think of it as spamming.
You can set the option 'Delay between mails' to postpone each message by some seconds and see if this was the reason that your service provider blocked your access.

Miha.
 
 
 

Next thread   Back to list

  skipping names on the list    hits: 1913
Posted by    
Reply      Monitor
hi,
i just downloaded the software today and was trying to send some emails as per my list, what i find is it sends few mails, then skips the same no. of names, then again it sends few and again skips. this goes on till i reach an error message, connect failed. is this normal or do i have some problem with my service provider.
thanks
prem thomsa
 
 
 

Next thread   Back to list

  NOTE: Changed rules on this forum    hits: 1965
Posted by    
Reply      Monitor
Hi!

I have been experiencing with a lot of spam on this forum lately. Because I hate spam and it made forum useless I am forced to change the rules of posting.

From now on you have to be a registered user to post a question or hint on the forum. All the users are still able to read all the messages, you just have to log in to post one.

I hope this will not affect you, the users - because this forum is ment for you and you alone!

Miha.
 
 
 

Next thread   Back to list

  Connection failed    hits: 2926
Posted by    
Reply      Monitor
Vse je delalo OK, do včerajšnega dne. Kar na enkrat je začel program ob pošiljanju pisati "connection failed". Spreminjal nisem 0, tako da me zanima kaj bi bilo narobe? Je kakšna povezava s to stranjo? Se morda vse informacije prepišejo še kam drugam, ta server pa trenutno ni dostopen?  
 
 

Next thread   Back to list

  Re: Connection failed    hits: 1923
Posted by    
Reply      Monitor
Če je program prej deloval, potem pa kar naenkrat ne, stvar sigurno ni v programu, ampak je lahko v
- uporabniškem imenu in geslu
- povezavi v internet
- poštnem strežniku
- pravicah na poštnem strežniku
- nastavitev strežnika
- nastavitev požarnega zidu

LP,

Miha.
 
 
 

  Back to list

  Re: Connection failed    hits: 1673
Posted by    
Reply      Monitor
I get the message " connection failed" . How do I connect , inorder to send out messages?

Thank you .
Please reply to glamhong@yahoo.com.my
 
 
 


  Re: Connection failed    hits: 1725
Posted by    
Reply      Monitor
If the program worked before, then it could be one or more of:
- mail user name
- internet connection
- mail server
- user rights on the mail server
- mail server settings
- your firewall settings

If the program never worked, then it is probably connected to the mail server settings... Check if the settings and username are correct and if your ISP supports sending mail through standard ports without password.

Hope this helps.

Miha.
 
 
 

Next thread   Back to list

  Mihov Mail Sender    hits: 2746
Posted by    
Reply      Monitor
Very nice and smart application
Bravo!

Umberto
 
 
 

  Back to list

  Re: Mihov Mail Sender    hits: 1512
Posted by    
Reply      Monitor
Umberto wrote:
> Very nice and smart application
> Bravo!
>
> Umberto


Thank you!!

Miha.
 
 
 

Next thread   Back to list

  conection fail    hits: 3811
Posted by    
Reply      Monitor
when are you going to solve that problem by sending mail from internet accounts whith passwords like yahoo. other mail programs do it like outlook express, incredimail etc. they overcome the proxy server and the psswords.  
 
 

Next thread   Back to list

  Re: conection fail    hits: 2322
Posted by    
Reply      Monitor
Hi!

At the time I have no intenssion of doing so. Maybe in some later time or when I will need this feature for my own use...

jacob wrote:
> when are you going to solve that problem by sending mail from internet accounts whith passwords like yahoo.
 
 
 


  Re: conection fail    hits: 2114
Posted by    
Reply      Monitor
Well, as it stands, your program is useless!
Miha wrote:
> Hi!
>
> At the time I have no intenssion of doing so. Maybe in some later time or when I will need this feature for my own use...
>
> jacob wrote:
> > when are you going to solve that problem by sending mail from internet accounts whith passwords like yahoo.
 
 
 

Next thread   Back to list

  dont know my server connection    hits: 2291
Posted by    
Reply      Monitor
dont know my server connection?  
 
 


  Re: dont know my server connection    hits: 1986
Posted by    
Reply      Monitor
NEED 2 SET UP INTERN CONNECTION WIZARD  
 
 


  Re: dont know my server connection    hits: 2042
Posted by    
Reply      Monitor
SUANI wrote:
> NEED 2 SET UP INTERN CONNECTION WIZARD
DONT KNOW
 
 
 

  Back to list

  Re: connect failed    hits: 1798
Posted by    
Reply      Monitor
I try to send mail and it shows connect failed. Secondly I don't know my mail server; or probably I dont understand what you mean by my mail server. Please explain and reply me directly through personal email above. (owowajoo@yahoo.com)  
 
 


  Re: connect failed    hits: 1733
Posted by    
Reply      Monitor
The same to me as on 13 nov 2005.  
 
 

Next thread   Back to list

  Info    hits: 2679
Posted by    
Reply      Monitor
Zanima me, kdaj pride nova verzija tega programa in ali bo v naslednji verziji že mogoče uporaba proxya?

lp
 
 
 

  Back to list

  Re: Info    hits: 1764
Posted by    
Reply      Monitor
Nova verzija je res že pred vrati, čeprav točni datum težko povem... Morda že ta vikend, najverjetneje pa nekje proti koncu leta.

Uporaba proxyja v tej verziji ne bo mogoča, prav tako pa te funkcionalnosti zaenkrat nimam namena vključiti.

Lep pozdrav,

Miha.
 
 
 

Next thread   Back to list

  Help for 'Conection failed' error message    hits: 2850
Posted by    
Reply      Monitor
This list should help you get rid of 'Conection failed' error message when trying to send messages.

Go through the list below and see if you're doing something wrong:

1. You are not connected to the internet.
The program needs internet connection when sending mail, therefore you should connect before using it.

2. You are behind firewall.
Make sure that you set up your firewall or firewall software in the way that it will allow Mihov Mail Sender to connect to the internet. How to do this can be found in manuals and/or help files of your firewall software.

3. The server address that you supplied in the settings window is false.
make sure that you're using the right SMTP server. Usualy this is something like smtp.yourISP.com or mail.yourISP.com. This is not your e-mail address! If you're not sure or don't know what this means contact your internet service provider (ISP) and ask him about your outgoing mail server settings.

4. User name for outgoing server is false.
Make sure that you're using the right user name suplied to you by your ISP.

5. Your mail server can only send mails if connected with password or with secure connection.
Note that Mihov Mail Sender 0.7 doesn't support mail servers that require authentication.

6. You don't have an appropriate mail server available.
In that case it is the best to use an outgoing mail server that is freely available to everyone and is free of charge. Use Google to find the one thta suits your needs most.

7. (NEW) If you're running Windows XP Service Pack 2 then maybe Windows itself are blocking the program. Read more about XP and SP2 and how to fix that at http://forum.mihov.com/view.php?site=qa&bn=qa_ms&key=1099521224&first=1099521224&last=1007203673

This should solve the problem.

Miha.
 
 
 

  Back to list

  Re: Help for 'Conection failed' error message    hits: 1441
Posted by    
Reply      Monitor
Is there a log option that will help diagnose where the fault is? I have all of these correct.  
 
 


  Re: Help for 'Conection failed' error message    hits: 1363
Posted by    
Reply      Monitor
No, in the current version there is no logging for the data that you are looking for. maybe I will include that in the next versions, but up till now there has been no requests for this feature.

Miha.
 
 
 

Next thread   Back to list

  How do I?    hits: 2522
Posted by    
Reply      Monitor
Can I send a compressed ALBUM of photos? If so, how?  
 
 

  Back to list

  Re: How do I?    hits: 1335
Posted by    
Reply      Monitor
Just attach the file as attachment and send it!  
 
 

Next thread   Back to list

  SMTP port    hits: 2891
Posted by    
Reply      Monitor
Ali se Mail Senderju slučajno da dopovedati, da SMTP strežnik dela na drugem portu, ne na 25?  
 
 

Next thread   Back to list

  Re: SMTP port    hits: 1664
Posted by    
Reply      Monitor
Ups, na to funkcionalnost sem pa čisto pozabil... Ne, trenutno (v 0.7) te možnosti ni.

LP,

Miha.
 
 
 

  Back to list

  Re: SMTP port    hits: 1580
Posted by    
Reply      Monitor
Lahko mi pošlješ mejl, sem dodal v program.  
 
 


  Re: SMTP port    hits: 1555
Posted by    
Reply      Monitor
Si pa hiter, čestitam. Ali je program na voljo za uporabo?  
 
 


  Re: SMTP port    hits: 1568
Posted by    
Reply      Monitor
Ja pošlji mi mejl na domači naslov, pa ti ga pošljem! Pa boš povedal, če dela :)

LPM.
 
 
 

Next thread   Back to list

  Unsuccesful down load.    hits: 2633
Posted by    
Reply      Monitor
When trying to bring up pix for converting, I cannot get my documents or my picture folder to appear in choosing window. What am I not doing ?  
 
 

  Back to list

  Re: Unsuccesful down load.    hits: 1373
Posted by    
Reply      Monitor
I think you posted in wrong forum... This is the forum for Mail Sender!

You should navigate to the right folder. c: -> Documents and Settings -> YourUserName -> My Documents.

Miha.
 
 
 

Next thread   Back to list

  Cannot Connect ~ Money back ?    hits: 3006
Posted by    
Reply      Monitor
I have been unable to connect useing version 0.7 . I have went thru everything and made sure all settings are correct . It has never worked 1 time ! I want my money back if I can't get it to work .  
 
 

  Back to list

  Re: Cannot Connect ~ Money back ?    hits: 1692
Posted by    
Reply      Monitor
I'm sorry to hear that it doesn't work for you. Have you tried the trial version before you have purchased the keycode?
The problem that you have could be solved by these steps:
Find out if you're using the right outgoing server. The right server does not use password authentication and connects on standard ports without SSL.
Check the outgoing server name for errors.
See if you have provided the right user name for the outgoing server.
Make sure that no other mail program is reading your mail at the same time (some outgoing servers allow only one connection).
Make sure that your firewall is configured so that it lets Mihov Mail Sender connect to the internet.
If you are Windows XP SP2 user then read the warning on the program web page.

I hope you will be able to set up the environment so that the program will be able to send mails.

About the refund: I'm not sure what is usually done in such cases. I will read more on shareware, but I think that the whole point of shareware is to try the program first and then, if you like it (and if it works like you expected it), buy it. Note that the trial version of Mihov Mail Sender has no limitations so you were able to make a ful test prior to buying it.

But I think you'll be able to resolve the problem, so there will be no need for refund.

Good luck,

Miha.
 
 
 


  Re: Cannot Connect ~ Money back ?    hits: 1700
Posted by    
Reply      Monitor
Excuse me , But I have tried everything and it still doesn't work . Your product sucks ! I will be filing a chargeback with my credit card company unless you refund me !  
 
 


  Re: Cannot Connect ~ Money back ?    hits: 1677
Posted by    
Reply      Monitor
Hi!

If this is how you have decided, then I will refund your order. I have decided so because you have complained in a reasonable time after ordering the product.


I suggest next time you try the software prior to buying it; that is the whole shareware concept. It may help you keep your nerves if you bump to some software sellers that are not as understandable as I am.

Best regards,

Miha.
 
 
 

Next thread   Back to list

  deleting photos    hits: 2591
Posted by    
Reply      Monitor
how do i delete the photos that i no longer need - the mini's and the originals?  
 
 

  Back to list

  Re: deleting photos    hits: 1438
Posted by    
Reply      Monitor
Just as you would delete any file: open Windows Explorer, select the file(s) and press Delete button.  
 
 

Next thread   Back to list

  How do I find my right outgoing mail serer    hits: 5620
Posted by    
Reply      Monitor
I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?

Thanks
 
 
 

Next thread   Back to list

  Re: How do I find my right outgoing mail serer    hits: 3961
Posted by    
Reply      Monitor
Ask your service provider - they know all this information and should tell it to you!

Miha.
 
 
 

Next thread   Back to list

  Re: How do I find my right outgoing mail serer    hits: 3824
Posted by    
Reply      Monitor
Dear Sir
When i send e-mails i comeacross with the word telling connect failed.
please help me
braveheart wrote:
> I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?
>
> Thanks
 
 
 


  Re: How do I find my right outgoing mail serer    hits: 3822
Posted by    
Reply      Monitor
hassan wrote:
> Dear Sir
> When i send e-mails i comeacross with the word telling connect failed.
> please help me
> braveheart wrote:
> > I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?
> >
> > Thanks
 
 
 


  Re: How do I find my right outgoing mail serer    hits: 3691
Posted by    
Reply      Monitor
please could you help me in getting my outgoing mail server  
 
 


  Re: How do I find my right outgoing mail serer    hits: 3622
Posted by    
Reply      Monitor
Ask your ISP!!!  
 
 

Next thread   Back to list

  Re: How do I find my right outgoing mail serer    hits: 3764
Posted by    
Reply      Monitor
You need to check with your ISP. Alternatively, you can download one of the free SMTP servers from the web. Check SmartPost or PostCast. SmartPost is small, PostCast is huge(15MB), but it really works.
Happy Mailing, and dont spam!
braveheart wrote:
> I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?
>
> Thanks
 
 
 

Next thread   Back to list

  Re: How do I find my right outgoing mail serer    hits: 3605
Posted by    
Reply      Monitor
I USE YAHOO AND AOL. PLEASE HELP ME AND SEND THE PROPER MAIL SERVER FOR BOTH OF THESE. THANKS  
 
 

Next thread   Back to list

  Re: How do I find my right outgoing mail serer    hits: 3672
Posted by    
Reply      Monitor
 
 
 

  Back to list

  Re: How do I find my right outgoing mail serer    hits: 3538
Posted by    
Reply      Monitor
How do I find the copy of the messages i have sent
braveheart wrote:
> I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?
>
> Thanks
braveheart wrote:
> I am at a lose in where to find my outgoing maiul service address to install in outgoing mail server spot in mailer, could soneone help?
>
> Thanks
 
 
 


  Re: How do I find my right outgoing mail serer    hits: 3434
Posted by    
Reply      Monitor
Donald F. Collins wrote:
> How do I find the copy of the messages i have sent

There is no 'sent items' or archive. The messages that you have sent are not saved anywhere.
 
 
 

Next thread   Back to list

  Mihov Mail Sender 0.6    hits: 2811
Posted by    
Reply      Monitor
Hoj!

A bi se dalo dobit staro verzijo programa 0.6

LPK
 
 
 

Next thread   Back to list

  Re: Mihov Mail Sender 0.6    hits: 1636
Posted by    
Reply      Monitor
Na voljo je le zadnja različica programa...

Miha.
 
 
 


  Re: Mihov Mail Sender 0.6    hits: 1512
Posted by    
Reply      Monitor
A bi mi lahko vseeno poslal 0.6 verzijo?  
 
 


  Re: Mihov Mail Sender 0.6    hits: 1468
Posted by    
Reply      Monitor
Si dobil.  
 
 

Next thread   Back to list

  Re: Mihov Mail Sender 0.6    hits: 1596
Posted by    
Reply      Monitor
caooooooooo mihoooooooo  
 
 


  Re: Mihov Mail Sender 0.6    hits: 1566
Posted by    
Reply      Monitor
Ja?  
 
 

  Back to list

  Re: Mihov Mail Sender 0.6    hits: 1478
Posted by    
Reply      Monitor
hii
izi wrote:
> Hoj!
>
> A bi se dalo dobit staro verzijo programa 0.6
>
> LPK

izi wrote:
> Hoj!
>
> A bi se dalo dobit staro verzijo programa 0.6
>
> LPK
 
 
 

Next thread   Back to list

  Connection failed    hits: 3017
Posted by    
Reply      Monitor
Hi.
All was ok ..but in 1 day it is writing "Connection failed"..... i have tryed everything
Check my DSN , try other mail servers , check all wotj firewall , reinstall program...
But it still is writing the same thing
Can u help me?
 
 
 

Next thread   Back to list

  Re: Connection failed    hits: 1907
Posted by    
Reply      Monitor
Maybe it's some other program messing with Window settings...? What have you installed close to that day when it stopped working? Did you change your ISP?  
 
 


  Re: Connection failed    hits: 1698
Posted by    
Reply      Monitor
Don't know... i haven't installed anything that can harm this prog or that can change newtwork settings...
And what is that ISP.
Anyway ... your prog is very good ;)
 
 
 


  Re: Connection failed    hits: 1747
Posted by    
Reply      Monitor
So u cannt help me?
*all stuff is ok the prob is in your prog cuz other mail senders on 25 port work.
 
 
 


  Re: Connection failed    hits: 1636
Posted by    
Reply      Monitor
If the program worked OK and then it just stopped... It has to be something else, not the program. And that means that I can't really help, sorry.

Miha.
 
 
 


  Re: Connection failed    hits: 1728
Posted by    
Reply      Monitor
ISP means Internet Service Provider, for example AOL in US. Maybe they changed something...?  
 
 


  Re: Connection failed    hits: 1574
Posted by    
Reply      Monitor
I have problem , Connect - failed ,
I could not able to send anything .
Miha wrote:
> ISP means Internet Service Provider, for example AOL in US. Maybe they changed something...?

Miha wrote:
> ISP means Internet Service Provider, for example AOL in US. Maybe they changed something...?
 
 
 


  Re: Connection failed    hits: 1448
Posted by    
Reply      Monitor
Having said that, it was working ok earlier. Might just be weight of traffic. And before I forget, its a very useful little program.  
 
 

Next thread   Back to list

  Re: Connection failed    hits: 1732
Posted by    
Reply      Monitor
hello sir
thanks for puting lot of resources on net its very intresting

sir i have downloaded the mail application
i am unable to send the mail

plz help me
 
 
 

Next thread   Back to list

  Re: Connection failed    hits: 1894
Posted by    
Reply      Monitor
When you get 'Connection failed' message this means that...

1. You are not connected to the internet.
The program needs internet connection when sending mail, therefore you should connect before using it.

2. You are behind firewall.
Make sure that you set up your firewall or firewall software in the way that it will allow Mihov Mail Sender to connect to the internet. How to do this can be found in manuals and/or help files of your firewall software.

3. The server address that you supplied in the settings window is false.
make sure that you're using the right SMTP server. Usualy this is something like smtp.yourISP.com or mail.yourISP.com. This is not your e-mail address! If you're not sure or don't know what this means contact your internet service provider (ISP) and ask him about your outgoing mail server settings.

4. User name for outgoing server is false.
Make sure that you're using the right user name suplied to you by your ISP.

5. Your mail server can only send mails if connected with password or with secure connection.
Note that Mihov Mail Sender 0.7 doesn't support mail servers that require authentication.

6. You don't have an appropriate mail server available.
In that case it is the best to use an outgoing mail server that is freely available to everyone and is free of charge. Use Google to find the one thta suits your needs most.

This list should help you get rid of this error.

Miha.
 
 
 

Next thread   Back to list

  Re: Connection failed    hits: 1581
Posted by    
Reply      Monitor
It can be Windows XP SP2 also...
Read more at http://forum.mihov.com/view.php?site=qa&bn=qa_ms&key=1099521224&first=1099521224&last=1007203673

Miha.
 
 
 

  Back to list

  Re: Connection failed    hits: 1534
Posted by    
Reply      Monitor
I am here for the same reason. Sometimes the Mailsend works, sometimes fails to connect before transmission, sometimes at a point during. I have not loaded any other software recently. I have adjusted firewall and virus scanner to not check outgoing mail while I send in case this affected it. I shall now try with virus scanner and firewall off. Reluctantly... and report back. LZ  
 
 


  Re: Connection failed    hits: 1520
Posted by    
Reply      Monitor
Firewall and virus checker make no odds, and a single copy of the same mail with same attachments sent via Outlook Express via same mail server settings is fine. My mailings are 5-40 at a time and each has a 700k attachment, I wonder if a threshold/limit has been reached at the ISP?

lordzen wrote:
> I am here for the same reason. Sometimes the Mailsend works, sometimes fails to connect before transmission, sometimes at a point during. I have not loaded any other software recently. I have adjusted firewall and virus scanner to not check outgoing mail while I send in case this affected it. I shall now try with virus scanner and firewall off. Reluctantly... and report back. LZ
 
 
 

Next thread   Back to list

  šumniki    hits: 3769
Posted by    
Reply      Monitor
kam pa vpišeš "iso-8859-2", da dobiš šumnike

lp, andrej
 
 
 

  Back to list

  Re: šumniki    hits: 2469
Posted by    
Reply      Monitor
V meniju pojdi na 'Nastavitve' in tam vpiši pod 'Kodiranje znakov'. To bi moralo delovati vsaj za telo besedila, za naslov pa moraš biti malo bolj iznajdljiv, saj standard ne podpira različnih kodnih tabel zanj - zato lahko celo besedilo zakodiraš v razpored ISO. To narediš tako, da čžš-je zamenjaš z ustreznimi kodami, vse skupaj pa vključiš med oznaki '=?ISO-8859-2?Q?' in '?='. Ja, nepregledno, vem.
Naše znake pa spremeniš takole:
Č -> '=C8'
Š -> '=A9'
Ž -> '=AE'
č -> '=E8'
š -> '=B9'
ž -> '=BE'

Kožuh bi torej napisal takole:
=?ISO-8859-2?Q?Ko=BEuh?=

Aja, presledke moraš spremeniti pa v podčrtaj, se mi zdi...

Poigraj se!

Pozdrav,

Miha.
 
 
 


  Re: šumniki    hits: 2263
Posted by    
Reply      Monitor
Imam nov računalnik z Windows XP. Na isti računalnik sem naložil program v FoxPro 2.5. za DOS. Imam problem s slovenskimi črkami (mali in veliki čšž). Ko startam DOS-ov program FoxPro jih ni na ekranu in ne v DBF tabelah. Pri izpisu se ti znaki normalno izpišejo. (Prej sem imel Windows 98, kjer je vse delovalo.)

Vsaka ideja je dobrodošla. Hvala vnaprej.

Janez
 
 
 

Next thread   Back to list

  Mihov Mail Sender and Windows XP Service Pack 2    hits: 2886
Posted by    
Reply      Monitor
Hi!

Note that if you upgrade Windows XP with Service Pack 2 (SP2) then Mihov Mail Sender may stop working. SP2 comes as an automatic update and will prbably get installed on your machine, too.

Where is the problem? The main problem is that Windows XP SP2 has a firewall built in. Nothing new, except that it disables internet access to all programs by default. This measn that the default settings will make Mihov Mail Sender to fail when sending messages and showing the 'Connect failed' message.

This can be 'fixed' by enabling Mihov Mail Sender access to the internet, or 'unblock' it, as Windows XP refer to it. As I don't use XP I'm not really sure how to do that. I hope someone here can write more about what SP2 does, why it does it, and how to manually change its settings.

You will probably be asked, if you want to block Mihov Mail Sender; if you see this question, you have to answer 'unblock' if you want the program to work.

Miha.
 
 
 

Next thread   Back to list

  Acquisto Programma    hits: 3065
Posted by    
Reply      Monitor
Salve,
desideravo acquistare il Suo programma, ma non ho la carta di credito, come posso fare? Grazie.
Damiano
 
 
 

  Back to list

  Re: Acquisto Programma    hits: 1681
Posted by    
Reply      Monitor
Hi,
did I desire to purchase Your program, but don't I have the credit card, as can I do? Thanks.
Damiano

Damiano wrote:
> Salve,
> desideravo acquistare il Suo programma, ma non ho la carta di credito, come posso fare? Grazie.
> Damiano
 
 
 


  Re: Acquisto Programma    hits: 1524
Posted by    
Reply      Monitor
It is possible to pay by check or Paypal over the internet, and it is possible to send me the cash to my home address. After I receive it I will send you the keycode to register the program.
Is that acceptable for you?

Thanks for your request,

Miha.
 
 
 


  Re: Acquisto Programma    hits: 1610
Posted by    
Reply      Monitor
How much Euro I have to send her? and to which address? Thanks.
Damiano
 
 
 


  Re: Acquisto Programma    hits: 1593
Posted by    
Reply      Monitor
Hi!

You can send 15 EURO to this address:

Miha Psenica
Maroltova 12
1000 Ljubljana
Slovenia

When I receive the money I will send you a keycode for unlocking the program. Make sure that you write your e-mail address clearly in the mail and write that you want to purchase Mihov Mail Sender.

Best regards,

Miha.
 
 
 

Next thread   Back to list

  New: Mihov Mail Sender version 0.7    hits: 3105
Posted by    
Reply      Monitor
Hi!

I'm happy to tell you all that I have released a new version of the program. Major new features and changes include:
- show time in log window and log file
- possible to set a delay between mails
- ability to save recipient list
- ability to save message
- ability to clear recipient list
- ... and many more!

Note that the program is now licenced as 'Try before Buy' or with one word Shareware. Trial period is 30 days but I think everybody who uses the program or has used previous versions will find out that this is a good program in less than 30 days. After 30 days of use you have to either delete the program (uninstall it) or register it. You can register the program at this link: https://www.swreg.org/soft_shop/2981/shopscr15.shtml - it will take you directly to a secure server. The price for the registration is $15, which I think is not high for a program like this.

I hope you'll download the new version of the program from the new web site: http://www.mihov.com/sw/en/ms.php

Best regards,

Miha.
 
 
 

Next thread   Back to list

  Re: New: Mihov Mail Sender version 0.7    hits: 1893
Posted by    
Reply      Monitor
I still haven't resolved problem on stteings on old program. AOL old me my outgoing server is smpt.aol.com. Still doesn't work when I type that in. Would love to have a mail program that works. I have an address book of 580 clients that I'd like to send newsletter to, but cannot resolve these issues with your mail program  
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1856
Posted by    
Reply      Monitor
I still think it's SMTP not smpt...  
 
 

  Back to list

  Re: New: Mihov Mail Sender version 0.7    hits: 1849
Posted by    
Reply      Monitor
Miha: I've used your Mail Sender program for a few
months, and I think it' s great. But the page that
lists your current version, 0.7, has links that download
only version 0.6. Am I doing something wrong?

Also, does your new 0.7 version support
password authentication?

Exelsior! Sean Brimm.
 
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1951
Posted by    
Reply      Monitor
Hi!

I think the links on my page link to th eright version. Where did you see the wrong link?

No, the new version still doesn't support password authentication. There's so many severs that don't use that that I think it's not that neccessary.

Miha.
 
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1898
Posted by    
Reply      Monitor
Miha: the page at:
http://www.mihov.com/sw/en/ms.php
has three links to the download for the mail sender.
Unfortunately, the download at
http://download.mihov.com/mailsend.exe
is still pointing to the 0.6 version, even if I clear the
browser cache and reload the page.

Verizon.net is one ISP that does require password
authentication, and from what I've been reading
of plans to change SMTP authentication in the
future, password authentication is a growing
trend. But, using SMTP servers like PostCast
Professional can get around this little problem.

Hope this helps! Sean.
 
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1882
Posted by    
Reply      Monitor
Hi!

Thanks for letting me know. I think the server guys played with things a little and had to use backup copies. And I guess the copies were rather old. But it's really cool that you let me know about this!!!!

Greatful Miha.
 
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1905
Posted by    
Reply      Monitor
Miha, is it possible to send mail thrugh proxy? Will there ever me possible?  
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1761
Posted by    
Reply      Monitor
Hi!

Thanks for your question.

With the current version it is NOT posible to send e-mail through proxy. This also helps to fight spam sender a little, so I think I will not include this in the program. Well, at least not now that there's this much spam in the world.

I hope I answered your question...

Miha.
 
 
 


  Re: New: Mihov Mail Sender version 0.7    hits: 1864
Posted by    
Reply      Monitor
bad :( I wanted to buy next version, but it looks like I need to find another program... I hope I will find any other simple as this one with proxy function...
Thx anyway...
 
 
 

Next thread   Back to list

  i want to send html email too/some problem with csv    hits: 3362
Posted by    
Reply      Monitor
nice program and easy to use.

but i have problem to send email with a comma seperated file. I have name /adres/phoneno and email adres(exported from my outlook contacts) in the file email are send out but never arrived. If I delete every other colum and only have the emailadres left than there email is arriving perfectly.

I also like to send html email and i have read a message here where you mention a test version. I will be glad to test it. Please email it to me.

Thanks
 
 
 

Next thread   Back to list

  Re: i want to send html email too/some problem with csv    hits: 1693
Posted by    
Reply      Monitor
> but i have problem to send email with a comma seperated file. I have name /adres/phoneno and email adres(exported from my outlook contacts) in the file email are send out but never arrived. If I delete every other colum and only have the emailadres left than there email is arriving perfectly.

That is how it is: the address file has to be text only, so only e-mail addresses are allowed. One per row! If you include other data from a csv fille, than it is possible that the mail will be sent but not delivered. So you have to use the text only files!!

Miha.
 
 
 

  Back to list

  Re: HI    hits: 1687
Posted by    
Reply      Monitor
how are you  
 
 

Next thread   Back to list

  help manual for mihov mail sender.    hits: 3398
Posted by    
Reply      Monitor
After seeing the postings in this forum, I thought that I should make one for the benefit of fellow users of mihov' mail sender. Please visit my site at:
http://www.pscraja.o-f.com/software/mihov_manual.html

I hope it is useful. I have made it as clear as possible. Please let me know if there are some grey areas.

pscraja
 
 
 

Next thread   Back to list

  Re: help manual for mihov mail sender.    hits: 1954
Posted by    
Reply      Monitor
Thank you for your help, but I prefer if you send me the file by e-mail. This way I can include it with the program.

The other thing is that the address supplied leads to a Not-Found page and a lot of pop up ads... So I have removed the address from your post. If it was a mistake, please send the file to me and I will publish on my server.

Hi!

I appologize for the statement above; I think it is great that you've created the help file!!! The link to the file was leading to a wrong URL that is way I was angry with all the ads... But I have edited the link and it works great now!!
I hope you give me permission to include this help file with the program and that I link to your page from the Mihov Mail Sender web site.

Thanks again, it's great to see people who care!

Have fun,

Miha.
 
 
 


  Re: help manual for mihov mail sender.    hits: 1903
Posted by    
Reply      Monitor
I wil be too happy to be of help to persons like you who give such wonderful yet compact software. You are free to include this in your program pack.

Before that, please check if it is ok , and if you want any improvement so that you can post this in a more presentable form. Perhaps the graphics could be improved. Please let me have your comments to any of my email IDs

pscraja@eth.net
pscraja@hotmail.com
sudharsaninsu@hathway.com

I will do the rest.

with regards,

pscraja.-
 
 
 

  Back to list

  Re: help manual for mihov mail sender.    hits: 1909
Posted by    
Reply      Monitor
Does outgoing mail server have to be a numeric value? I just put in smpt.aol.com and am getting connect failed message. Where do I get this number for outgoing server from?  
 
 


  Re: help manual for mihov mail sender.    hits: 1870
Posted by    
Reply      Monitor
No, it's OK to put in a 'human' address. Note that you typed smpt instead of smtp!! This might be your error.  
 
 

Next thread   Back to list

  plug-in for OE    hits: 2890
Posted by    
Reply      Monitor
Hoj!

A obstaja kaksen plugin for OE ali za Outlook, ki bi deloval tako kot ta tvoj program?

LPK
 
 
 

  Back to list

  Re: plug-in for OE    hits: 1658
Posted by    
Reply      Monitor
Pojma nimam! Outlooka v življenju še nisem zares uporabljal. Ampak na število downloadov mojega programa mislim, da nič podobnega ne obstaja!

Miha.
 
 
 

Next thread   Back to list

  The 'Connection failed' error message    hits: 4270
Posted by    
Reply      Monitor
'Connection failed' error message happens to many users. This are the possible errors with solutions:
1. You are not connected to the internet.
-------> Connect to the internet first, than try to send messages!
2. You typed the information wrong.
-------> Double-check the settings!
3. You are behind firewall (proxy server).
-------> The program does not support proxys. Sorry.
4. Your mail server needs password authentication.
-------> The program does not support such servers at this time!

The error should be gone by now.
 
 
 

Next thread   Back to list

  Re: The 'Connection failed' error message    hits: 2556
Posted by    
Reply      Monitor
'Your mail server needs password authentication'
can you adv me where to find such server.
tks!
Miha Psenica wrote:
> 'Connection failed' error message happens to many users. This are the possible errors with solutions:
> 1. You are not connected to the internet.
> -------> Connect to the internet first, than try to send messages!
> 2. You typed the information wrong.
> -------> Double-check the settings!
> 3. You are behind firewall (proxy server).
> -------> The program does not support proxys. Sorry.
> 4. Your mail server needs password authentication.
> -------> The program does not support such servers at this time!
>
> The error should be gone by now.
 
 
 

Next thread   Back to list

  Re: The 'Connection failed' error message    hits: 2502
Posted by    
Reply      Monitor
'Your mail server needs password authentication'
can you adv me where to find such server.
tks!
Miha Psenica wrote:
> 'Connection failed' error message happens to many users. This are the possible errors with solutions:
> 1. You are not connected to the internet.
> -------> Connect to the internet first, than try to send messages!
> 2. You typed the information wrong.
> -------> Double-check the settings!
> 3. You are behind firewall (proxy server).
> -------> The program does not support proxys. Sorry.
> 4. Your mail server needs password authentication.
> -------> The program does not support such servers at this time!
>
> The error should be gone by now.
 
 
 


  Re: The 'Connection failed' error message    hits: 2558
Posted by    
Reply      Monitor
> 'Your mail server needs password authentication'
> can you adv me where to find such server.

I think yahoo is like this, but I am not sure... Anyway, it won't work with my program...
 
 
 


  Re: The 'Connection failed' error message    hits: 2547
Posted by    
Reply      Monitor
What do I put in the server box. smpt.earthlink.net or what  
 
 


  Re: The 'Connection failed' error message    hits: 2490
Posted by    
Reply      Monitor
Yes, that would be it...

> What do I put in the server box. smpt.earthlink.net or what
 
 
 


  Re: The 'Connection failed' error message    hits: 2477
Posted by    
Reply      Monitor
Cannot send out email on outlook express. Get error messages.  
 
 


  Re: The 'Connection failed' error message    hits: 2481
Posted by    
Reply      Monitor
Tried everything it still won't work. All I want to do is tell everyone my new email address.  
 
 

Next thread   Back to list

  Re: The 'Connection failed' error message    hits: 2406
Posted by    
Reply      Monitor
Now I get the message recipient not found and then connect failed.
Miha Psenica wrote:
> 'Connection failed' error message happens to many users. This are the possible errors with solutions:
> 1. You are not connected to the internet.
> -------> Connect to the internet first, than try to send messages!
> 2. You typed the information wrong.
> -------> Double-check the settings!
> 3. You are behind firewall (proxy server).
> -------> The program does not support proxys. Sorry.
> 4. Your mail server needs password authentication.
> -------> The program does not support such servers at this time!
>
> The error should be gone by now.
 
 
 

Next thread   Back to list

  Re: The 'Connection failed' error message    hits: 2514
Posted by    
Reply      Monitor
my emailer was sendind great last night but will not send a thing today ... every time click the go button it goes straight to disconected...help help ...thanks  
 
 


  Re: The 'Connection failed' error message    hits: 2580
Posted by    
Reply      Monitor
I think you should try again later... I think it was a problem with your connection (or possiblly your SMTP settings). Check them again and try tomorrow :)

Miha.

> my emailer was sendind great last night but will not send a thing today ... every time click the go button it goes straight to disconected...help help ...thanks
 
 
 

  Back to list

  Re: The 'Connection failed' error message    hits: 2485
Posted by    
Reply      Monitor
When will this program support server password authorization?

Morana
 
 
 


  Re: The 'Connection failed' error message    hits: 2485
Posted by    
Reply      Monitor
Sorry, but I can't tell that. The program is freeware so I can spend only free time on it - and I don't have much free time now :-(  
 
 

Next thread   Back to list

  Can't connect    hits: 2784
Posted by    
Reply      Monitor
Does Miha's Mail Sender work with ADSL?  
 
 

  Back to list

  Re: Can't connect    hits: 1515
Posted by    
Reply      Monitor
Yes.  
 
 

Next thread   Back to list

  Just Don't Get The Basics    hits: 3007
Posted by    
Reply      Monitor
I have created web sites for bands and send out monthy emails to people who join their mailing list. I have between 2 and 5 hundred email address' on each list. I have been using Outlook to create my list and then I send out the email with all the list in the BCC. I get most returned to me when I know that the address' are good. I broak my lists into groups of 50 but still get many many returns. I am not sending spam but I guess that is what it looks like when there are several recipients for one email. I believe that everyone out there knows the solution to this but me. I do these websites for free so I have no budget to pay people to do this, I am assuming this is something I can do myself. I was wondering if this mail sender would be betterthan outlook????? Thanks Fred  
 
 

Next thread   Back to list

  Re: Just Don't Get The Basics    hits: 1812
Posted by    
Reply      Monitor
Hi!

I am using it for sending more than 1000 emails and I have no problems at all. However, note that people change their e-mail addresses very fast - even if I clear the list the next month there is 5 - 10% bad addresses. And I think that's a lot.
Another thing is that you have to make the list for Mihov Mail Sender correct. That is, no other information than just e-mail adressess, one per line. It's easy, but some users just don't follow this simple rule.

I think you should try Mihov Mail Sender and see if it does job for you like you want it to. I think it does!

Miha.
 
 
 


  Re: Just Don't Get The Basics    hits: 1607
Posted by    
Reply      Monitor
Miha,

This program is too simple to be useful. You must be familiar with YAMS.
You need a text feature substitution.... for example

Dear $NAME$,
It is good to contact you again. I have your email address as $EMAIL$. Please verify that this is correct. Thank you $NAME$.


Miha Psenica wrote:
> Hi!
>
> I am using it for sending more than 1000 emails and I have no problems at all. However, note that people change their e-mail addresses very fast - even if I clear the list the next month there is 5 - 10% bad addresses. And I think that's a lot.
> Another thing is that you have to make the list for Mihov Mail Sender correct. That is, no other information than just e-mail adressess, one per line. It's easy, but some users just don't follow this simple rule.
>
> I think you should try Mihov Mail Sender and see if it does job for you like you want it to. I think it does!
>
> Miha.
 
 
 

Next thread   Back to list

  Re: Just Don't Get The Basics    hits: 1664
Posted by    
Reply      Monitor
I have used Mihov Mail Sender, and I feel that it is a beautiful Mailer, it either goes or it doesn't. The only problem I have experienced with it is has been that my isp has closed port 25 for sending.

If your addresses are in order, you may have to find an isp that will allow you to run a mailing list.
 
 
 

  Back to list

  hey j8    hits: 1810
Posted by    
Reply      Monitor
hey  
 
 

Next thread   Back to list

  Can not connect???    hits: 2366
Posted by    
Reply      Monitor
I have checked everything outgoing server is correct. What else can I do. I have DSL. Am I unable to send with DSL? If so can I send with MSN?  
 
 

Next thread   Back to list

  attachments!!!    hits: 2891
Posted by    
Reply      Monitor
Is it possible to send more than one attachment at the same time? If yes, how?  
 
 

  Back to list

  Re: attachments!!!    hits: 1595
Posted by    
Reply      Monitor
As I remember it's not possible.  
 
 

Next thread   Back to list

  Mihovs Mail Sender    hits: 2979
Posted by    
Reply      Monitor
Dear Mihov !
SettingsOK, click on send message, displays SEND START, a dialog box with all recepients appears, and after this, another dialog box with " connect failed" and lower bar displays "recepient not found" !! What the hell is wrong my friend?
 
 
 

  Back to list

  Re: Mihovs Mail Sender    hits: 1609
Posted by    
Reply      Monitor
Try to find out if you're having some spaces or blank lines in the address file. This file should be plain text file and without names or other characters.

Hope this helps!

Miha.
 
 
 

Next thread   Back to list

  connect failed    hits: 3229
Posted by    
Reply      Monitor
Hi,

Although i had given my smtp server and login details.but unable to send messages using your software.

Ravikiran B M
 
 
 

Next thread   Back to list

  Re: connect failed    hits: 2009
Posted by    
Reply      Monitor
You will have to provide me with more information.

My guess is that
a) the SMTP info is not correct
b) SMTP server uses password user authentication, which is not supported by Mihov Mail Sender at the time.
 
 
 

Next thread   Back to list

  Re: connect failed    hits: 1941
Posted by    
Reply      Monitor
Mihov's Email Sender said, "Fail conected"
but I have fill all information about my smtpmail.idola.net.id

Could I send bulk email to hundreds mailing list at @yahoogroups.com?

Thanks.
God always bless you.
Simon Mangande
 
 
 


  Re: connect failed    hits: 1940
Posted by    
Reply      Monitor
You have to be connected to the internet...

You can send messages to yagoo, but this program is NOT to be used for sending spam!

Miha.
 
 
 

Next thread   Back to list

  Re: connect failed    hits: 1965
Posted by    
Reply      Monitor
Dear Sir
When i send e-mails i comeacross with the word telling connect failed.
please help me
 
 
 


  Re: connect failed    hits: 2036
Posted by    
Reply      Monitor
make sure that you're using the right server name and other data and then try again! And the best way to get this data is by asking your provider.  
 
 

  Back to list

  Re: connect failed    hits: 1864
Posted by    
Reply      Monitor
please i need an answer immediately.i was trying to send mail and it keeps on saying connect failed.  
 
 

Next thread   Back to list

  kodne tabele    hits: 3427
Posted by    
Reply      Monitor
pri nastavitvah mailsenderja je koda us ascil že napisana, ato pomeni, da lahko napišem tudi katero drugo kodno tabelo in če, kako to mora izgledat recimo koda za slovenske windowse  
 
 

Next thread   Back to list

  Re: kodne tabele    hits: 1940
Posted by    
Reply      Monitor
Za slovenski razpored znakov bi moral tja napisati windows-1250, pa bi delovalo. Poskusi!

Miha.
 
 
 


  Re: kodne tabele    hits: 1956
Posted by    
Reply      Monitor
Ako dovolis en majhen popravek: iso-8859-2 je kodna tabela ki bo delovala v vseh okoljih ne le na winblows  
 
 


  Re: kodne tabele    hits: 1807
Posted by    
Reply      Monitor
Imaš prav, tudi to je vredno poskusiti.

Miha.
 
 
 

  Back to list

  Re: kodne tabele    hits: 1827
Posted by    
Reply      Monitor
ok  
 
 

Next thread   Back to list

  HTML mail? Can I send?    hits: 3304
Posted by    
Reply      Monitor
Hi,
Congratulations for your program. Fine and Cool!
I would like to send html mails. How can I do this?
Regards from Brazil/SA
 
 
 

Next thread   Back to list

  Re: HTML mail? Can I send?    hits: 1937
Posted by    
Reply      Monitor
> Congratulations for your program. Fine and Cool!
THANK YOU!!!

> I would like to send html mails. How can I do this?
At the time this is not possible yet :-( But don't worry, I have it in mind and I am developing a version with (very basic) HTML mail support also. If you want I can send you a preview of version 0.6 - just send me an e-mail and tell me so!

Have fun,

Miha.
 
 
 

  Back to list

  Re: HTML mail? Can I send?    hits: 1760
Posted by    
Reply      Monitor
hi:how are u dear.i meet u plz reply me ok  
 
 


  Re: HTML mail? Can I send?    hits: 1737
Posted by    
Reply      Monitor
Yes, with the new version 0.6 HTML mail can be sent. Just select the HTML radio button in the main window and that's it!

Miha.
 
 
 

Next thread   Back to list

  Sending Problem - For Miha Psenica; Urgent!    hits: 2682
Posted by    
Reply      Monitor
Hi Miha,

your mailsender sends the mails only to the first recipient,
then appears immediately "Connect Failed"!
How to obviate to this?

Reply to me soon, please!

Thanks.
Bye.

Mauro
 
 
 

  Back to list

  Re: Sending Problem - For Miha Psenica; Urgent!    hits: 1427
Posted by    
Reply      Monitor
Hi!

Try to be patient, as nothing is that urgent that it couldn't wait... :-)

I think the problem was not with the program but with your address file. It should have no blank lines - if the program finds a blank line then it stops there and it doesn't continue to send messages. Open the address list in Notepad and make sure the file looks fine.

Another possibility would be that the first address is invalid and the server responds with a code that is unknown to Mihov Mail Sender.

Good luck,

Miha.
 
 
 

Next thread   Back to list

  MIHOV MAIL SENDER    hits: 2892
Posted by    
Reply      Monitor
I LIKE TO SEND 2000 MAILS THRU MIHOV. IT TAKES 30 MINUTES TO 40 MINUTES TO SEND THE MAILS. HOW TO INCREASE THE SPEED? DO I HAVE TO CHANGE ANY SETTINGS?  
 
 

  Back to list

  Re: MIHOV MAIL SENDER    hits: 1735
Posted by    
Reply      Monitor
You should increase your connection speed or change your smtp server.  
 
 

Next thread   Back to list

  Character set    hits: 2958
Posted by    
Reply      Monitor
Miha, you made great mail sender! Easy to use and to configure. Thank you very much!

Only one thing make me and my customers unhappy now: I can not set proper character set. Here, in Ukrainian we use Cyrillic alphabet. Your program send messages in Ukrainian fine, but it puts "us-ascii", while I need to have win-1251. Is it possible to make it possible to choose character set for the e-mails? This should not be difficult.
 
 
 

  Back to list

  Re: Character set    hits: 1728
Posted by    
Reply      Monitor
UMKA wrote:
> Miha, you made great mail sender! Easy to use and to configure. Thank you very much!

You're welcome!!! :-)


>now: I can not set proper character set. Here, in

I will try to program that and if it makes me no problems it should be ready for the next version... I'll let you know!

Miha.
 
 
 


  Re: Character set    hits: 1826
Posted by    
Reply      Monitor
How can I use Character set?  
 
 


  Re: Character set    hits: 1704
Posted by    
Reply      Monitor
You can use it by opening Setting window and filling the charset field. You should write something like us-ascii or windows-1250. Check the internet for a list of complete character sets and you'll see. If you find one good you might even publish it here for the others to see.

Good luck,

Miha.
 
 
 

Next thread   Back to list

  some problem..    hits: 2986
Posted by    
Reply      Monitor
can u tell me the exact steps in order to get the program started? i want to ask the experiance person, how do u make it work?  
 
 

  Back to list

  Re: some problem..    hits: 1680
Posted by    
Reply      Monitor
See also manual: http://forum.mihov.com/view.php?site=qa&bn=qa_ms&key=1057057637  
 
 

Next thread   Back to list

  help...    hits: 2647
Posted by    
Reply      Monitor
I have completed the user settings and all the informations before sending emails to orthers but i got stuck at the last stage...the program asks me to enter my email-settings but i can't find them........  
 
 

Next thread   Back to list

  Re: help...    hits: 1576
Posted by    
Reply      Monitor
Ask your internet provider - he has all the info you need.

Miha.
 
 
 

  Back to list

  Re: help...    hits: 1582
Posted by    
Reply      Monitor
your answer is not clear..the email-setting is the part of ur program..
miki wrote:
 
 
 


  Re: help...    hits: 1530
Posted by    
Reply      Monitor
That is true, but the information you have to fill in is provided by your internet provider. I don't know your outgoing server name and username; he does.

Good luck,

Miha.
 
 
 


  Re: help...    hits: 1737
Posted by    
Reply      Monitor
thanks Miha..i'm getting u...  
 
 

Next thread   Back to list

  i need your help    hits: 2550
Posted by    
Reply      Monitor
i do not know how to use this programe

and what i have to put in the setting of this program
please help me what i have to do as i have more than one millione email want to send them
 
 
 

Next thread   Back to list

  Re: i need your help    hits: 1418
Posted by    
Reply      Monitor
More than a million? I doubt you have so many friends, so I guess you're sending spam. Sorry, won't help. I hate spam!  
 
 

  Back to list

  Re: i need your help    hits: 1441
Posted by    
Reply      Monitor
I have made an illlustrated manual for mihov mail sender. Please visit my site:

www.pscraja.o-f.com/software/mihov_manual.html

pscraja.
 
 
 


  Re: i need your help    hits: 1416
Posted by    
Reply      Monitor
Hi!

This is very good stuff, thank you very much!! Your help is highly appreciated and I don't know how to thank you.

I appologize for the post in the other thread, but the URL supplied there was wrong. I will correct the URL so it will point to the right location, OK?

Thanks again for your great contribution!

Miha.
 
 
 


  Re: i need your help    hits: 1417
Posted by    
Reply      Monitor
How can I print the picture I have resized?  
 
 


  Re: i need your help    hits: 1421
Posted by    
Reply      Monitor
You can not print it with Mihov Image Resizer. However, you can print it with your favorite photo editor software or simply with 'Imaging' that comes with Windows. Usually you can find it under Programs -> Accessories -> Imaging.

Good luck,

Miha.
 
 
 

Next thread   Back to list

  Getting Started    hits: 2263
Posted by    
Reply      Monitor
Where are step by step instructions on getting started.  
 
 

Next thread   Back to list

  Re: Getting Started    hits: 1351
Posted by    
Reply      Monitor
Maybe some experianced user should write this... It is true that the program hasn't got any help file or getting started guide!
Any volunteers?

Miha.
 
 
 


  Re: Getting Started    hits: 1222
Posted by    
Reply      Monitor
I did send an email to myself but say I have a dozen + email. Do I use MS Word and make a list of email. I did do this and when I inserted the email all I got was a lot of crazy letters etc. Not sure what or how to do that part.  
 
 


  Re: Getting Started    hits: 1313
Posted by    
Reply      Monitor
Avoid MS Word! Use Notepad. If you have to use MS Word, then save the file as 'Plain Text' - this way the garbage will be gone!  
 
 


  Re: Getting Started    hits: 1249
Posted by    
Reply      Monitor
Thanks I will work on this.

Harry
 
 
 


  Re: Getting Started    hits: 1274
Posted by    
Reply      Monitor
Ok, Mr. Mihov, I made two files with note pad. one for emails and the other for the body of the email. This all went well but when I clicked the email to be sent it said it could not connect. At that time my connection was28899bps which could be the reason. What else?

Harry
 
 
 


  Re: Getting Started    hits: 1375
Posted by    
Reply      Monitor
Ok, it was my modem speed at the time was to low of a connection. The second time it was4000 bps and the emails were sent.

Harry
 
 
 


  Re: Getting Started    hits: 1322
Posted by    
Reply      Monitor
So I guess you've made it! That's great to hear.

Keep up the good work,

Miha.
 
 
 

  Back to list

  Getting Started    hits: 1364
Posted by    
Reply      Monitor
I download from download .com, it send mail one time but after that i am receiving faild msg.
trinity wrote:
> Where are step by step instructions on getting started.
 
 
 


  Re: Getting Started    hits: 1173
Posted by    
Reply      Monitor
Look at http://forum.mihov.com/view.php?site=qa&bn=qa_ms&key=1057057637&first=1057076453&last=1007203673